3. Window: device designations and measured value designations
Datalogger: C.M.I. or SD card
Device and measured value designations can be entered for all specified devices.
The measured value designations for the X2 devices (UVR16x2 from version 1.21, RSM610 from version 1.08, CAN-I/O module 45 from version 1.04, CAN-EZ2 from version 1.04 and CAN-BC2 from version 1.04) can be adopted by the devices.
The measured value designations for X2 devices with a lower version and for devices without X2 technology (e.g. UVR1611) can only be entered manually after selecting the device.
The measured value designations should be adopted from all
X2 devices (with the appropriate version).
You will be prompted to specify whether all designations or only those that are not yet available ("empty") should be replaced.
The controller measured value designations will now be displayed and incorporated in Winsol. These designations can be changes manually.
Example: device 1 (UVR16x2); the device designation is entered manually.
Important: setup is only confirmed once "OK" is clicked.
Dataloggers: BL-NET, D-LOGG
The measured value designations of the devices are not incorporated.
Device and measured value designations can be entered manually for all specified devices.
The device is selected.
Device designations and the analogue and digital values are inserted.
Important: setup is only confirmed once "OK" is clicked.
